Dynamic Scale Loop

Scaled Solutions’ state-of-the-art Dynamic Scale Loop allows for high quality testing of scale inhibitor performance at high temperature and high pressure. Differential pressure is measured independently across the scaling coil and inline filter, allowing for investigation of different scaling mechanisms. This versatile design can also be used as the basis for rigs for exotic or asphaltene scales, depending on client needs.

We now have 2 options available for our Dynamic Scale Rig.

DSR 5000N

Our state-of-the-art Dynamic Scale Rigs allow high quality testing of scale inhibitor performance at high pressure and temperature. Equipment specification can be tailored to clients needs, with our standard rigs operating at conditions of 5000 psi and 200°C. Our rigs are extremely functional and reliable, and follow the same design principles as rigs used in Scaled Solutions laboratories on a daily basis.

The rigs utilise custom designed logging and control software which provides a high degree of automation, allowing the rig to be operated 24 hours a day with minimal supervision. The rigs are also designed with a strong emphasis on safety, with multiple features that prevent over pressurisation.

Rig Specifications:

  • Rig specifications starting from 2,500 psi and 200°C. Upgraded rigs allow testing up to 10,000 psi
  • Corrosion resistant Alloy 600 or Hastelloy C276 flow lines
  • Integrated safety features to control rig temperature and pressure
  • 3 HPLC pump setup
  • Automated logging and control software
  • Pre-programmed test sequences
  • 1m and 3m scaling test coils
  • Option to include in-line filter to examine exotic scales
  • Optional secondary outlet flow system with inline monitoring of effluent pH and /or dissolved O2 levels
  • Trolley or bench mounting available
  • Equipment fully commissioned before installation at client site
  • Comprehensive documentation included

DSR UltraLight

Scaled Solutions’ DSR UltraLight option follows the design of the DSR 5000 with respective quality materials used for rig build. The DSR UltraLight standard design includes the following:

  • 3 HPLC pumps. 1 for cation brine, 1 for anion brine and 1 for chemical dosing.
  •  All controlled separately through software and automated for dose rate testing.
  • Flush head system to increase seal life and reduce servicing requirements.
  • All hot system pipework and fittings are corrosion resistant Alloy 600 tubing and Monel 400 fittings as standard.
  • Temperature controlled fan assisted oven.
  • In-line thermocouple.
  • 1/16” Scaling coils in both 1m and 3m lengths.
  • Absolute pressure transducers calibrated between 0 and 2,500 psi.
  • Differential pressure transmitter and readout, calibrated between 0 and 50 psi.
  • Isolation valves across the differential pressure transducers would be included to protect the DPT.
  • Pressure gauge between 0 and 2,500 psi.
  • Bench mounted frame and panel with mounted valves.
  • Outlet cooling system.
  • Outlet pressure control valve with varying springs for fine control over variety of pressure ranges.
  • Automated data acquisition system.
  • Automatic switching valve for cleaning system.
  • PC for data acquisition, logging and control.
  • Commissioning and pressure testing to 2,500 psi and 200 °C.
  • All electrical plugs ready for connection in final country location.
  • EMC / LVD testing completed with CE marking as appropriate.
  • FCC compliance testing conducted alongside CE marking.
  • 1 year warranty.

Additional Options:

  • Pump upgrade: Option between 2,500psi and 5,000psi pumps. Upgrade pump head from SS316 to Hastelloy depending on flow rates.
    Client specified pump could be integrated to software.
  • All system pipework, valves and fittings. Upgrade to more corrosion resistant HC-276. Other materials may be available upon request.
  • System Pressure and Temperature. Pressure from 2,500 psi up to 5,000 psi. Temperature from 200 °C up to 250 ºC. Additional pressures and temperatures available upon request.
  • 1/16” Scaling coils in both 1m and 3m lengths. Other bespoke lengths and internal bores may be available upon request.
  • Second differential across inline filter for milder scaling regimes or capturing scale for analysis.
  • Automated chemical switching valve. Allowing the user to apply up to 5 different chemicals in sequence with cleanout and priming between chemical runs. Giving more automation of equipment and further decreasing the need for user interaction for more efficiency within the laboratory.
  • Inline pH measuring and logging. Downstream of relief valve at ambient pressure.
  • Gas manifold fitted to rig for brine sparging with CO2 and N2 combinations. Used for anaerobic conditions or brine pH buffering.
  • Additional outlet points within the system.
  • Extended warranty and service contracts available.
  • System is completely adjustable to meet client specification and rigs have been produced in the past to include dual purpose systems.
  • All other additional requirements can be considered and discussed with our in-house expert.

If you are interested in the purchase of one of our Dynamic Scale Rigs, or we can assist you in another area, please contact us.